3. TEL shaped decoys.
Thomas D. MacDonald 21, a fellow in the Nuclear Policy Program at the Carnegie Endowment for International Peace. He has an interdisciplinary scientific background which he applies to interesting technical problems which are interwoven with political concerns. June 2021, “Hide and Seek: Remote Sensing and Strategic Stability,” Massachusetts Institute of Technology, accessed online via UMich libraries
TEL-Shaped Decoy An average RCS decoy is capable of deceiving SMTI, which only measures the RCS distribution. SAR and ISAR instead measure the spatial distribution of the scattering centers of the target, which can be used to form an image. An average RCS decoy can be constructed from a small number of corner reflectors while a TEL-shaped decoy mimics not just the sizes of the scattering centers, but also their spatial distribution. One of the challenges of creating a TEL-shaped decoy is that TELs are large objects. Decoys are ideally easily and cheaply built, so that many can be used in conjunction (discussed in detail below). A shape decoy must be able to approximate the physical size of a real TEL, meaning that it will be on the order of tens of meters in length. The challenges of creating a TEL-shaped decoy mirror those of shaping an actual TEL for RCSR. The same set of radar reflective materials, metal sheets or mesh can be used to control the RCS of a decoy. In the case of TEL RCSR, the TEL itself is large and can serve as a skeleton on which the outer radar reflective skin can be mounted. One possible decoy design would be to utilize an interior scaffolding made of inexpensive and lightweight material such as PVC tubing or aluminum struts to form the scaffold over which a wire mesh could be stretched. Integrating the mesh with a fabric or plastic liner, the same color as a TEL would make the decoy difficult to identify with optical modalities, in the case it was moved during the day.16 In order to make such a simple decoy indistinguishable from an actual TEL, the same procedure could be used on actual TELs, i.e. decoys are made more convincing when used in conjunction with RCSR shaping. Making the TEL decoy mobile would allow the hider additional modes for deceiving the seeker. Two simple methods for making a shape decoy mobile are mounting it on a smaller vehicle or on a trailer. In both cases, the decoy needs to be made lightweight enough that it can be carried by a vehicle such as one of the TEL convoy support vehicles. A TEL sized decoy could be skinned with 60–180 kg of material.17 If scaffolding were constructed from aluminum tubing, it could weigh on the order of a few hundred kilograms.18 Collectively, the decoy material would weight half a ton, approximately the payload weight capacity of a half-ton pickup truck. Such a decoy could be fabricated for roughly the cost of the pickup truck itself, on the order of tens of thousands of dollars. A less expensive option would be to mount the decoy on a trailer that could be towed by a security vehicle. This would have the advantage of being able to be disconnected and left in a shelter indefinitely.